Dunlop RX-3000 is a ready mixed tile adhesive and is suitable for fixing wall tiles such as…
Ceramic tiles (no bigger than 300 x 300mm)
and Mosaic tiles
Ready mixed adhesives are classified “D” for dispersion which means they must lose the moisture in them to fully dry out.
If a tile is too dense (such as porcelain), or too large (bigger than 300 x 300mm), the moisture will become trapped and the adhesive will not fully dry or reach full strength.
For porcelain, natural stone or large format tiles, we would recommend that a suitable Dunlop cement-based adhesive is used such as CF-03 FLEXIBLE FAST SET TILE ADHESIVE or CF-24 FLEXIBLE TILE ADHESIVE.
0
0
Was this article helpful?
0 out of 0 found this helpful
Articles in this section
- How quickly after tiling with DUNLOP RX-3000 can I grout?
- Once I’ve applied DUNLOP RX-3000 to the wall, how long have I got to fix tiles?
- How much coverage will I get from a 15kg tub of DUNLOP RX-3000?
- Can I tile onto plasterboard using DUNLOP RX-3000?
- Can I tile onto plaster using DUNLOP RX-3000?
- Can I tile onto existing tiles using DUNLOP RX-3000?
- Can I tile onto cement:sand render using DUNLOP RX-3000?
- What tiles can I fix when using DUNLOP RX-3000?
- Where can I use DUNLOP RX-3000?
- What’s the benefit of using a ready mixed adhesive over a powder adhesive?
Add comment
Article is closed for comments.